How to Seal Sandstone Bricks 1

Sandstone bricks are commonly used in the building of fireplaces, patios, small decorative walls, and garden walkways. This material is easy to work with, provides a great look, and is relatively inexpensive. In some instances, sandstone bricks can be made with the right combination of ingredients. One of the problems with sandstone bricks is that it is very porous. Whenever sandstone bricks are used for a project, it is important that a sealer be applied.

Step 1 - Purchase Sandstone Brick Sealer

There are many different sealers on the market today. When buying the sealer for the sandstone bricks you must by a fluoropolymer based sealer. This sealer will impregnate the porous property of the sandstone bricks in order to block off any channels that water may seep into. This type of sealer can be easily found at your local hardware store.

Step 2 - Clean Sandstone Bricks

Before the sealer is applied to the sandstone bricks, they must be clean of any dirt or residue left over from the installation. Since the sealer must be able to penetrate into the sandstone itself, any type of dirt that gets in the way will give water a chance to cause cracks. Clean the bricks with a moist rag, brush, and vacuum.

Step 3 - Mix Sealer

Take the can of sealer to the area where the sandstone bricks are and remove the cover. With a mixing stick, not a power mixing attachment, mix up the sealer until it is a smooth consistency. It should not be like water, but a thick paint. As you mix the sealer keep it smooth instead of stirring it excitedly. This could cause air bubbles to be captured within the sealer that can cause weaknesses in the coverage

selected from:https://www.doityourself.com/stry/how-to-seal-sandstone-bricks